| Manufacturing Technology: | Optoelectronic Semiconductor |
|---|---|
| Material: | Element Semiconductor |
| Type: | N-type Semiconductor |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | MODEL: | 1SP0635D2S1-33 | 1SP0635V2M1-33 |
Single-Channel Plug-and-Play Driver with Master/Slave Operation, Drives IGBTs from 1200V to 3300V with On-board DC/DC Converter
The SCALEM-2 plug-and-play driver 1SP0635x2x1-33 is a compact single-channel intelligent gate driver designed for 3300V 130x140mm and 190x140mm IGBT modules.The master driver 1SP0635x2M1-33 features a fiber-optic interface with a built-in isolated DC DC power supply.It can be used as stand-alone driver or in conjunction with up to three 1SP0635D2S1-33 slaves to drive up to our parallel-connected IGBT modules.
The turn-on and turn-off gate resistors as well as the auxiliary gate capacitor are not assembled in order to provide maximum flexibility. They must be assembled by the user before start of operation. Please refer to the paragraph on"Gate Resistor and Auxiliary Gate Capacitor Assembly" for the recommended values.
Summary of Features
Applications
| IGBT Voltage Class | 3300 V |
| Technology | SCALE-2 |
| Power - Output/Channel (Max) | 3.00 W |
| Temperature - Operating (Min) | -40 ºC |
| Temperature - Operating (Max) | 85 ºC |
| Interface Type | Fiber Optic |
| Number of Channels | 1 |
| Gate Peak Current (Max) | +35 A |
| Product Type | Board |
| Product Sub-Type | PnP Driver |
| Supported Module Type | IGBT |
| Main/Peripheral | Peripheral |
| Supported Topologies |
2-level Voltage Source
3-level NP-Clamped - Type 1
3-level NP-Clamped - Type 2
Multi-Level NP-Clamped
|
| Protection Features |
Dynamic Adv Active Clamping
Over-voltage
Short Circuit
UVLO(Sec-side)
|
| Driving Mode | Direct-Independent |
| Connection Type to IGBT | Direct |
| Supply Voltage (Typ) | 15.00 V |
| Gate Turn-on Voltage | +15.00 V |
| Gate Turn-off Voltage | --10.10 V |
| Voltage - DC Link Off state (60s) | 2700.00 V |
| Time - Output Rise | 9.00 ns |
| Time - Output Fall | 30.00 ns |
| Isolation Technology | Galvanic |
| Isolation Type | Basic |
| Temperature - Storage (Min) | -40.00 ºC |
| Temperature - Storage (Max) | 90.00 ºC |
| Gate Peak Current (Min) | -35 |
1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.
The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules.
The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring.
Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available:
For details, please check the product documentation.
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications.
Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}