Basic Info.
Certification
RoHS, CCC, ISO
Interface Type
Fiber Optic
Gate Peak Current (Min)
-35
Trademark
Power Integrations
Product Description
Power Integrations1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.
The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules.
The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring.
Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available:
- 1SP0635V, equipped with Versatile links
- 1SP0635S, equipped with ST links
For details, please check the product documentation.
Power supply and electrical insulation
In contrast to other SCALE-2 plug-and-play drivers, 1SP0335 family drivers are modular, with the driver and power supply (DC/DC converter) presented as two separate units.
Because of this modular concept, any driver that was developed to match a specific IGBT module can be used for any required insulation specifications. Only the separate power supply (ISO5125I) must be chosen for the specific application.
Therefore, drivers for 3.3 kV to 6.5 kV IGBTs can be implemented in 2-level, 3-level and multi-level inverter topologies.
The driver is mounted directly onto the IGBT module using three screws. The power supply (ISO5125I) is separately attached close to the IGBT. For parallel connected drivers, only one power supply is required per switch.
Specifications
Specifications| IGBT Voltage Class | 1700 V |
| Technology | SCALE-2 |
| Power - Output/Channel (Max) | 3.00 W |
| Temperature - Operating (Min) | -40 ºC |
| Temperature - Operating (Max) | 85 ºC |
| Interface Type | Fiber Optic |
| Number of Channels | 1 |
| Gate Peak Current (Max) | +35 A |
| Product Type | Board |
| Product Sub-Type | PnP Driver |
| Supported Module Type | IGBT |
| Main/Peripheral | Main |
| Supported Topologies | 2-level Voltage Source 3-level NP-Clamped - Type 1 3-level NP-Clamped - Type 2 Multi-Level NP-Clamped |
| Protection Features | Dynamic Adv Active Clamping Over-voltage Short Circuit UVLO(Sec-side) |
| Driving Mode | Direct-Independent |
| Connection Type to IGBT | Direct |
| Supply Voltage (Typ) | 15.00 V |
| Gate Turn-on Voltage | +15.00 V |
| Gate Turn-off Voltage | --10.10 V |
| Voltage - DC Link Off state (60s) | 1480.00 V |
| Time - Output Rise | 9.00 ns |
| Time - Output Fall | 30.00 ns |
| Isolation Technology | Galvanic |
| Isolation Type | Reinforced |
| Temperature - Storage (Min) | -40.00 ºC |
| Temperature - Storage (Max) | 90.00 ºC |
| Gate Peak Current (Min) | -35 |
About Power Integrations
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications.
Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
COMPANY PROFILE
Shenzhen Botong Electric Co., Ltd. is a professional distributor of imported branded products, located at 7S Yindu, Building 100, No. 4 Zhonghang Road, Huahang Community, Huaqiang North Street, Futian District, Shenzhen. Headquartered in Beijing (established in 2006), with offices in Shandong and Hebei. Its business involves power electronic components and supporting PI drive boards, LEM sensors, fans, and capacitors. Our company acts as an agent for the distribution of IGBT, IPM, PIM, rectifier bridge, thyristor, diode, etc. in Infineon, Semi kron, HITACHI, Fuji, Mitsubishi, SanRex, IXYS, etc; Ximenkang, PI driver board; Liteon optocoupler; Japan Jianzao IDC driver module; Electrolytic capacitor; Electronic components such as absorption capacitors (CAPSIT). Mainly used in: industrial automation, high-voltage inverter, UPS, inverter welding machine, inverter, high-frequency induction heating, commercial induction cooker, inverter power supply, wind and solar power generation, electric locomotive, electroplating power supply, soft start and other fields. We meet customer needs with excellent product performance, high reliable quality, superior service, the most favorable price and delivery time.STORAGE & DELIVERY
SHIPPING1.FEDEX/DHL/UPS for samples.
2.By Sea for batch goods.
3.Customers specifying freight forwarders or negotiable shipping methods.
FAQ 1.
Q :What's the MOQ. Can I get a sample of free? A : MOQ, according to the actual situation.
We can offer a sample of free. Please, friendly bear the shipping cost.
2.
Q : When can i get the quotation? A : We usually quote within 24 hours after getting your detailed requirements, like size, quantity, etc.
3
.Q : What is your payments terms? A : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
4.
Q : What is your terms of delivery? A : We accept FOB, CFR, CIF, EXW, etc. You can choose the most convenient way for
you. Besides that, we can also shipping by Air and Express.
Address:
Yindu 7s, Building 100, No. 4 Zhonghang Road, Huahang Community, Huaqiang North Street, Futian District, Shenzhen, Guangdong, China
Business Type:
Trading Company
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Shenzhen Botong Electric Co., Ltd. is a professional distributor of imported branded products, located at 7S Yindu, Building 100, No. 4 Zhonghang Road, Huahang Community, Huaqiang North Street, Futian District, Shenzhen. Headquartered in Beijing (established in 2006), with offices in Shandong and Hebei. Its business involves power electronic components and supporting PI drive boards, LEM sensors, fans, and capacitors. Our company acts as an agent for the distribution of IGBT, IPM, PIM, rectifier bridge, thyristor, diode, etc. In Infineon, Semikron, HITACHI, FUJI, Mitsubishi, SanRex, IXYS, etc; Ximenkang, PI driver board; Liteon optocoupler; Japan Jianzao IDC driver module; Electrolytic capacitor; Electronic components such as absorption capacitors (CAPSIT). Mainly used in: Industrial automation, high-voltage inverter, UPS, inverter welding machine, inverter, high-frequency induction heating, commercial induction cooker, inverter power supply, wind and solar power generation, electric locomotive, electroplating power supply, soft start and other fields. We meet customer needs with excellent product performance, high reliable quality, superior service, the most favorable price and delivery time.
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}