Sid1182K-Tl 1200V Scale-Idriver Gate Driver Ics

• Manufacturing Technology: Optoelectronic Semiconductor
• Material: Element Semiconductor
• Type: N-type Semiconductor
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SID1182K-TL
• Package: PGA(Pin Grid Array Package)
• Signal Processing: Analog Digital Composite and Function
• Application: Temperature Measurement
• Model: ST
• Batch Number: 2010+
• Brand: Pi
• Transport Package: Carton
• Trademark: Power Integration
• Origin: USA
• Production Capacity: 50000 PC/ Year
• Package Size: 36.00cm * 25.00cm * 5.00cm
• Package Gross Weight: 4.000kg

Product Description

MODEL:SID1182K-TL

Description

The SID11x2K is a single channel IGBT and MOSFET driver in an eSOP package. Reinforced galvanic isolation is provided by Power Integrations' innovative solid insulator FluxLink technology. The up to 8 A peak output drive current enables the product to drive devices up to 450 A (typical) without requiring any additional active components. For gate drive requirements that exceed the stand-alone capability of the SID1182K's, an external amplifier (booster) may be added. Stable positive and negative voltages for gate control are provided by one unipolar isolated voltage source.

Additional features such as short-circuit protection (DESAT) with Advanced Soft Shut Down (ASSD), undervoltage lock-out (UVLO) for primary-side and secondary-side and rail-to-rail output with temperature and process compensated output impedance guarantee safe operation even in harsh conditions.

Controller (PWM and fault) signals are compatible with 5 V CMOS logic, which may also be adjusted to 15 V levels by using external resistor divider

Product Highlights
Highly Integrated, Compact Footprint
• Split outputs providing up to 8 A peak drive current
• Integrated FluxLink™ technology providing safe isolation between primary-side and secondary-side
• Rail-to-rail stabilized output voltage
• Unipolar supply voltage for secondary-side
• Suitable for 600 V / 650 V / 1200 V IGBT and MOSFET switches
• Up to 250 kHz switching frequency
• Low propagation delay time 260 ns
• Propagation delay jitter ±5 ns
• -40 °C to 125 °C operating ambient temperature
• High common-mode transient immunity
• eSOP package with 9.5 mm creepage and clearance

Advanced Protection / Safety Features
• Undervoltage lock-out protection for primary and secondary-side (UVLO) and fault feedback
• Short-circuit protection using VCESAT monitoring and fault feedback
• Advanced Soft Shut Down (ASSD)

Full Safety and Regulatory Compliance
• 100% production partial discharge test
• 100% production HIPOT compliance testing at 6 kV RMS 1 s
• Reinforced insulation meets VDE 0884-10

Green Package
• Halogen free and RoHS compliant Applications
• General purpose and servo drives • UPS, solar, welding inverters and power supplies
 

Specifications

Specifications

Max Switching Frequency	250.00 kHz
IGBT Voltage Class	1200 V
Technology	SCALE-iDriver
Interface Type	Electrical
Number of Channels	1
Gate Peak Current (Max)	+8 A
Product Type	IC
Product Sub-Type	Driver IC
Supported Module Type	IGBT N-Channel MOSFET
Main/Peripheral	N/A
Supported Topologies	2-level Voltage Source 3-level NP-Clamped - Type 1 3-level NP-Clamped - Type 2 Multi-Level NP-Clamped
Protection Features	Basic Active Clamping Adv Soft Shutdown Dynamic Adv Active Clamping Short Circuit UVLO(Sec-side) UVLO(Pri-side)
Driving Mode	Direct-Independent
Logic Input Voltage	5
Supply Voltage (Typ)	5.00 V
Time - Output Rise	22.00 ns
Time - Output Fall	18.00 ns
Isolation Technology	Fluxlink
Isolation Type	Reinforced
Gate Peak Current (Min)	-8

About Power Integrations

Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications.

Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by  Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.

COMPANY PROFILE
Shenzhen Botong Electric Co., Ltd. is a professional distributor of imported branded products, located at 7S Yindu, Building 100, No. 4 Zhonghang Road, Huahang Community, Huaqiang North Street, Futian District, Shenzhen. Headquartered in Beijing (established in 2006), with offices in Shandong and Hebei. Its business involves power electronic components and supporting PI drive boards, LEM sensors, fans, and capacitors. Our company acts as an agent for the distribution of IGBT, IPM, PIM, rectifier bridge, thyristor, diode, etc. in Infineon, Semi kron, HITACHI, Fuji, Mitsubishi, SanRex, IXYS, etc; Ximenkang, PI driver board; Liteon optocoupler; Japan Jianzao IDC driver module; Electrolytic capacitor; Electronic components such as absorption capacitors (CAPSIT). Mainly used in: industrial automation, high-voltage inverter, UPS, inverter welding machine, inverter, high-frequency induction heating, commercial induction cooker, inverter power supply, wind and solar power generation, electric locomotive, electroplating power supply, soft start and other fields. We meet customer needs with excellent product performance, high reliable quality, superior service, the most favorable price and delivery time.

Storage & Delivery

SHIPPING

1.FEDEX/DHL/UPS for samples.
2.By Sea for batch goods.
3.Customers specifying freight forwarders or negotiable shipping methods.

FAQ

  1.Q :What's the MOQ. Can I get a sample of free?
      A : MOQ, according to the actual situation.
      We can offer a sample of free. Please, friendly bear the shipping cost.
   2.Q : When can i get the quotation?
      A : We usually quote within 24 hours after getting your detailed requirements, like size, quantity, etc.
   3.Q : What is your payments terms?
      A : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
   4.Q : What is your terms of delivery?
      A : We accept FOB, CFR, CIF, EXW, etc. You can choose the most convenient way for 
      you. Besides that, we can also shipping by Air and Express.