Basic Info.
Certification
RoHS, CCC, ISO
Interface Type
Fiber Optic
Supply Voltage (Typ)
15.00V
Gate Peak Current (Min)
-20
Trademark
Power Integrations
Product Description
MODEL: | 1SP0635V2M1-17 |
Power IntegrationsDual-Channel SCALE-2 Plug-and-Play Driver for PrimePACK™ IGBT Modules, Electrical or Fiber-Optic Interface, Embedded Paralleling CapabilityFeatures
© Plug-and-play solution
© Allows parallel connection of IGBT modules
© For 2-level, 3-level and multilevel topologies
© Shortens application development time
© Extremely reliable; long service life
© Built-in DC/DC power supply
© 20-pin flat cable interface (2SP0320T)
© Fiber-optic links (2SP0320V & 2P0320S)
© Duty cycle 0... 100%
© Active clamping of Vce at turn-off
© IGBT short-circuit protection
© Monitoring of supply voltage
© Safe isolation to EN 50178
© UL. compliant
© Suitable for 1200V IGBT modules
© Gate resistors not assembled
Applications
© Wind-power converters
© Industrial drives
© UPS
© Power-factor correctors
© Traction
© Railroad power supplies
© Welding
© SMPS
© Radiology and laser technology
© Researchand many others
Product Details
2SP0320 is specifically targeted at PrimePACK™ IGBT modules. As a member of the SCALE-2 plug-and-play driver family, it satisfies industry's requirements for optimized electrical performance and noise immunity.
The highly integrated SCALE-2 chipset reduces component count by 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The use of SCALE-2 technology also means that 2SP0320 devices are complete two-channel IGBT drivers equipped with DC/DC converters, short-circuit protection, Advanced Active Clamping and supply-voltage monitoring.
Users need only solder them onto the corresponding IGBT module. The system can then be put into immediate operation with no further development or matching engineering effort. This enables short design cycles to be realized without compromising overall system efficiency.
The embedded paralleling capability allows simple inverter design for higher power ratings.
Specifically adapted drivers are available for all IGBT module types. All drivers are available with electrical and fiber-optic interfaces.
Interface Options
The 2SP0320 driver series is available with one electrical and various fiber-optic interfaces.
Electrical Interface: 2SP0320T
The DIC20 electrical interface is very simple and easy to use.The driver has the following terminals:
- Power supply and GND terminals
- 2 x drive signal inputs
- 2 x status outputs (failure returns)
- 1 x mode selection (half-bridge mode / direct mode)
- 1 x input to set the blocking time
All inputs are ESD-protected and all digital inputs have Schmitt-trigger characteristics.
Fiber-Optic Interfaces: 2SP0320V and 2SP0320S
Fiber-optic links are used for the electrical insulation of the command and status-feedback signals. Two versions are available:
- 2SP0320V equipped with Versatile links
- 2SP0320S equipped with ST links
For details, check the product documentation.
Driving Parallel-Connected IGBTs
The driver allows direct parallel connection of any number of PrimePACK modules with individual drivers. This new, pioneering concept makes it practical for the first time to build a converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort.
Specifications
SpecificationsIGBT Voltage Class | 1200 V |
Technology | SCALE-2 |
Power - Output/Channel (Max) | 3.00 W |
Interface Type | Fiber Optic |
Number of Channels | 2 |
Gate Peak Current (Max) | +20 A |
Product Type | Board |
Product Sub-Type | PnP Driver |
Supported Module Type | IGBT |
Main/Peripheral | N/A |
Supported Topologies | 2-level Voltage Source 3-level NP-Clamped - Type 1 3-level NP-Clamped - Type 2 Multi-Level NP-Clamped |
Protection Features | Adv Active Clamping Over-voltage Short Circuit UVLO(Sec-side) UVLO(Pri-side) |
Driving Mode | Halfbridge Direct-Independent |
Connection Type to IGBT | Direct |
Supply Voltage (Typ) | 15.00 V |
Gate Turn-on Voltage | +15.00 V |
Gate Turn-off Voltage | --9.90 V |
Time - Output Rise | 7.00 ns |
Time - Output Fall | 25.00 ns |
Isolation Technology | Galvanic |
Isolation Type | Reinforced |
Gate Peak Current (Min) | -20 |
IGBT Voltage Class | 1200 V |
Technology | SCALE-2 |
Power - Output/Channel (Max) | 3.00 W |
Interface Type | Fiber Optic |
Number of Channels | 2 |
Gate Peak Current (Max) | +20 A |
Product Type | Board |
Product Sub-Type | PnP Driver |
Supported Module Type | IGBT |
Main/Peripheral | N/A |
Supported Topologies | 2-level Voltage Source 3-level NP-Clamped - Type 1 3-level NP-Clamped - Type 2 Multi-Level NP-Clamped |
Protection Features | Adv Active Clamping Over-voltage Short Circuit UVLO(Sec-side) UVLO(Pri-side) |
Driving Mode | Halfbridge Direct-Independent |
Connection Type to IGBT | Direct |
Supply Voltage (Typ) | 15.00 V |
Gate Turn-on Voltage | +15.00 V |
Gate Turn-off Voltage | --9.90 V |
Time - Output Rise | 7.00 ns |
Time - Output Fall | 25.00 ns |
Isolation Technology | Galvanic |
Isolation Type | Reinforced |
Gate Peak Current (Min) | -20 |
About Power Integrations
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications.
Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
COMPANY PROFILE
Shenzhen Botong Electric Co., Ltd. is a professional distributor of imported branded products, located at 7S Yindu, Building 100, No. 4 Zhonghang Road, Huahang Community, Huaqiang North Street, Futian District, Shenzhen. Headquartered in Beijing (established in 2006), with offices in Shandong and Hebei. Its business involves power electronic components and supporting PI drive boards, LEM sensors, fans, and capacitors. Our company acts as an agent for the distribution of IGBT, IPM, PIM, rectifier bridge, thyristor, diode, etc. in Infineon, Semi kron, HITACHI, Fuji, Mitsubishi, SanRex, IXYS, etc; Ximenkang, PI driver board; Liteon optocoupler; Japan Jianzao IDC driver module; Electrolytic capacitor; Electronic components such as absorption capacitors (CAPSIT). Mainly used in: industrial automation, high-voltage inverter, UPS, inverter welding machine, inverter, high-frequency induction heating, commercial induction cooker, inverter power supply, wind and solar power generation, electric locomotive, electroplating power supply, soft start and other fields. We meet customer needs with excellent product performance, high reliable quality, superior service, the most favorable price and delivery time.Storage & Delivery
SHIPPING1.FEDEX/DHL/UPS for samples.
2.By Sea for batch goods.
3.Customers specifying freight forwarders or negotiable shipping methods.
FAQ 1.
Q :What's the MOQ. Can I get a sample of free? A : MOQ, according to the actual situation.
We can offer a sample of free. Please, friendly bear the shipping cost.
2.
Q : When can i get the quotation? A : We usually quote within 24 hours after getting your detailed requirements, like size, quantity, etc.
3
.Q : What is your payments terms? A : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
4.
Q : What is your terms of delivery? A : We accept FOB, CFR, CIF, EXW, etc. You can choose the most convenient way for
you. Besides that, we can also shipping by Air and Express.
Address:
Yindu 7s, Building 100, No. 4 Zhonghang Road, Huahang Community, Huaqiang North Street, Futian District, Shenzhen, Guangdong, China
Business Type:
Trading Company
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Shenzhen Botong Electric Co., Ltd. is a professional distributor of imported branded products, located at 7S Yindu, Building 100, No. 4 Zhonghang Road, Huahang Community, Huaqiang North Street, Futian District, Shenzhen. Headquartered in Beijing (established in 2006), with offices in Shandong and Hebei. Its business involves power electronic components and supporting PI drive boards, LEM sensors, fans, and capacitors. Our company acts as an agent for the distribution of IGBT, IPM, PIM, rectifier bridge, thyristor, diode, etc. In Infineon, Semikron, HITACHI, FUJI, Mitsubishi, SanRex, IXYS, etc; Ximenkang, PI driver board; Liteon optocoupler; Japan Jianzao IDC driver module; Electrolytic capacitor; Electronic components such as absorption capacitors (CAPSIT). Mainly used in: Industrial automation, high-voltage inverter, UPS, inverter welding machine, inverter, high-frequency induction heating, commercial induction cooker, inverter power supply, wind and solar power generation, electric locomotive, electroplating power supply, soft start and other fields. We meet customer needs with excellent product performance, high reliable quality, superior service, the most favorable price and delivery time.
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.